EVALUATION OF EFFICIENCY AND OPTIMISATION OF CYCLONE-TYPE DUST COLLECTORS WITH A CIRCULAR SPRAY OF REVERSIBLE SUSPENSION FOR GAS PURIFICATION UP TO 250 °C
Abstract
The object of study is cyclone-type dust collectors with a disc sprayer of a recirculating dust-water suspension designed to clean ventilation and aspiration emissions in industrial conditions with temperatures up to 250°C.
The paper proposes a solution to the problem of increasing the efficiency of wet cleaning of dusty gas-air streams containing polydisperse dust up to 50 µm of various industrial origin. The influence of the main operating parameters, in particular, gas flow rate from 12 to 20 m/s, dust particle size from 1 to 50 µm, suspension flow rate from 0.5 to 2.5 l/m³ of gas and concentration of captured dust in recycled water up to 15 g/l, on the efficiency of the dust collection process is investigated.
The obtained experimental results of testing dust collectors in industrial conditions confirm analytical studies on the use of a circulating slurry disc sprayer while maintaining dust collection efficiency at 96-98% for particles of 10-50 microns and 85-90% for fine dust of 1-10 microns at a gas flow temperature of up to 250 °C. During the operation of the dust collector, it was determined that the recirculation of the working suspension inside the dust collector reduces annual water consumption by 25-30% while ensuring the stability of the cleaning process.
The differences in the results obtained are in the confirmation of the effectiveness of using compact dust collectors with internal recirculation of the working fluid, which reduces energy consumption by 15%, reduces operating costs and increases the duration of maintenance-free operation to 3000 hours. A methodology for assessing the efficiency of air purification is proposed, which takes into account the design parameters, operating modes of the device and the characteristics of the dusty flow.
The results of the research are of practical importance for the design and modernisation of aspiration systems of industrial enterprises, in particular in thermal shops and in the treatment of air emissions. They can be used to improve existing gas purification technologies, increase the efficiency of ventilation equipment, and reduce the impact of industrial emissions on the environment.
Keywords: dust collection, disc spray, aspiration, air dustiness, dust dispersion, particle deposition.
Full Text:
PDFReferences
Organiscak J. A., Noll J., Yantek D., Kendall B. (2016). Examination of a newly developed mobile dry Scrubber (DS) for coal Mine dust control applications. NIOSH, Pittsburgh, PA, United States. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84988316971&partnerID=40&md5=a4abfbcccb23e38f600e3047cbda2c3c
Bahloul Ali, Djebara Abdelhakim, Saidi Mohamed N. and Songmene Victor (2015). Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation. Chemical and Biological Hazards Prevention, Institut Robert-Sauvé en Santé et Sécurité du Travail, Montréal, Canada. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84987971010&partnerID=40&md5=cbade28442174a38505b8bca34d09dec
Jeon Tae-Yeong, Kim Jae-Yong (2015). Characterization of fine dust collection using a filter ventilation. Department of Environmental Engineering, Chungbuk National University, 362-763, Chungcheongbuk-do, South Korea. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84928411555&doi=10.14478%2face.2015.1022&partnerID=40&md5=de7670706aa4804b235c5e4134d93c76
Kateusz Przemysław (2015). Estimation of uncertainty of mean velocity of flue gas in a conduit as determined by the traverse method within the gravimetric measurement of particulate concentration. Silesian University of Technology, Department of Heating, Ventilation and Dust Removal Technology, ul. Konarskiego 20, Gliwice, 44-100, Poland. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84939185777&doi=10.1016%2fj.flowmeasinst.2015.07.014&partnerID=40&md5=c2a6079350c981ec02166b9d36d231b8
Jiang Zhong-An, Zhang Yi-Kun, Wang Ming (2016). Study and practice on dust control technology in fully mechanized excavation face. School of Civil and Environmental Engineering, University of Science and Technology—Beijing, Beijing, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85016767139&partnerID=40&md5=94d605a202bc1365106dc68ef2d760a7
Babaei Morteza, Bahrami Abdolrahman, Shahna Farshid Gorbani (2017). Control of fugitive dust emitted by combination of water spray and industrial ventilation as an efficient and economical solution at a mining company. Department of Occupational Health Engineering, Faculty of Public Health, Research Center for Health Science, Hamadan University of Medical Science, Hamadan, Iran. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85029471775&partnerID=40&md5=26a26b4248ff49d873557f226061865d
Zhao Haiming, Xie Xin, Xia Yimin, Liao Xiaole (2017). Research on operation parameters of three-phase flow in wet dust collecting fan. School of Mechanical and Electrical Engineering, Central South University, Changsha, 410083, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85026837770&doi=10.11817%2fj.issn.1672-7207.2017.06.013&partnerID=40&md5=6c72ea27bb02307ad39dc991f0415ddd
Arya Sampurna, Sottile Joseph, Novak Thomas (2018). Development of a flooded-bed scrubber for removing coal dust at a longwall mining section. Department of Mining Engineering, University of Kentucky, Lexington, KY, United States. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85052096035&doi=10.1016%2fj.ssci.2018.08.003&partnerID=40&md5=6424f4d4e952a9ab9992bab95eb568e5
Liu Yang, Xia Tianjie, Wang You, Chen Jinzhu, Li Xiaochuan (2020). Simulation and experimental investigation of dust-collecting performances of different dust exhaust hoods. School of Nuclear Science and Engineering, North China Electric Power University, Beijing, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85094645662&doi=10.1080%2f10962247.2020.1813841&partnerID=40&md5=f9785e5b7aaa81a61eab4be4dcff19ed
Yin Wenjing, Zhou Gang, Liu Dong, Meng Qunzhi, Zhang Qian, Jiang Tao (2021). Numerical simulation and application of entrainment dust collector for fully mechanized mining support based on orthogonal test method. College of Aeronautical Engineering, Weifang Engineering Vocational College, Weifang, 262501, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85098108778&doi=10.1016%2fj.powtec.2020.10.059&partnerID=40&md5=5e8fae1d9ee947a62f8fb27e402d405a
Fang Xueming, Jiang Bingyou, Yuan Liang, Liang Yuxiang, Ren Bo, Tao Wenhan, Li Xianbao (2022). Experimental Study on Atomization Characteristics of Gas–Liquid Two-Phase Flow Nozzle and Its Dust Removal Effect. Key Laboratory of Industrial Dust Control and Occupational Health, Ministry of Education, Anhui University of Science and Technology, Huainan, 232001, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85122887236&doi=10.3390%2fma15020565&partnerID=40&md5=ee80ac22aab9575bc098764a573b93d4
Zhao Xinli, Jia Jifeng, Li Xiaochuan, Wang Li, Wang Yuyao, Hu Haibin, Shen Zhiyuan, Jiang Yefeng (2022). Potential Use of Wet Scrubbers for the Removal of Tobacco Dust Particles in the Tobacco Industry. School of Chemical Engineering and Technology, China University of Mining and Technology, Xuzhou, 221116, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85125658358&doi=10.3390%2fatmos13030380&partnerID=40&md5=3140e02a823d6ad75e06200731c23b36
Angelina Chugai, Yuliia Bazyka (2019). Analysis of technogenic load on the air basin of industrial and urban aglomerations in Ukraine. Environmental Problems Vol. 4, No. 3, 2019, pp.167-173 DOI: https://doi.org/10.23939/ep2019.04.167 (in English)
Шелюх Ю. Є. (2016). Дослідження впливу гідравлічного опору на продуктивність роботи вихрових пиловловлювачів нового покоління. Вісник Львівського державного університету безпеки життєдіяльності, 13, 137-143. (українською)
Тисовський Л. О., Дорундяк Л. М., Ляшеник А. В., Дадак Ю. Р. (2010). Побудова математичної моделі для задачі про рух повітря в циклоні. Всеукраїнський науково-технічний журнал ПГіП. – 2010. – Вип. 2(28). – С. 57-62.
Ткачук, А. Я., Любарець, П. А., Петриченко, М. І., Степчук, І. Д. (1983). Пиловловлювач. Патент № 1044317 СРСР. Б.І. 1983, № 36, с. 19. (російською)
Зіняк, В. В., Ткачук, А. Я. (2001). Технологія очищення пилу в мокрих скрубберах. Технологічний розвиток вентиляційних систем, 13, 145–151. (українською)
Чакчір, Я. А., Петров, М. І., Петриченко, М. І., Сенько, П. М., Любарець, О. П. (1988). Пиловловлювач для мокрого очищення вентиляційних викидів. Патент № 1389825 СРСР. Б.І. 1988, № 15, с. 41. (російською)
Гаджієв, Е. Н., Варламов, Є. М. (2017). Аналіз дисперсії пилу в аспіраційних системах при виробництві теплоізоляційних матеріалів. Український науково-дослідний інститут екологічних проблем, Харків, 192. (українською)
Yu Yanbin, Fang Lianxin, Zhou Bo, Cui Wenting, Yin Shi, Song Kezhi (2025). Ventilation parameters’ impact on artificial tornado-based cylindrical vortex dust removal system performance. State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao, 266590, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-86000782144&doi=10.1016%2fj.apt.2025.104852&partnerID=40&md5=1a82ea8fb0e8328c480682d15688ecda
Ратушняк, Г. С., Лялюк, О. Г. (2009). Пристрої для очищення газових викидів. IV НВКП "Укргеліотех", 180. (українською)
Спінов В. М., Афтанюк В. В. (2011). Експериментальне дослідження кінетики мокрого пиловловлювача. Енергозбереження. Енергетика. Енергоаудит, Національний технічний університет «Харківський політехнічний інститут» № 2 (84), с. 32-46. (українською)
Любарець, О. П., Микитенко, М. Р. (2023). Аналіз факторів, що впливають на стан знепилення аспіраційних викидів. Вентиляція, Київський національний університет будівництва і архітектури, випуск 46, 89. (українською). Джерело: http://vothp.knuba.edu.ua/article/download/298374/291122 (українською)
Афтанюк В. В., Кіріс О. В., Даниленко Д. В., Афтанюк А. В. (2022). Розробка інтегрованої конструкції скрубера для суднових енергетичних установок. Суднові енергетичні установки: науково-технічний збірник. Вип. 45-Одеса: НУ «ОМА», 2022.-201 с. (українською)
Ilyushin Y., Talanov N. (2025). Development of Methods and Models for Assessing Technical Condition of Mines and Underground Structures. Economics Faculty, Empress Catherine II Saint Petersburg Mining University, Saint-Petersburg, 199106, Russian Federation. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85216569413&doi=10.5829%2fije.2025.38.07a.16&partnerID=40&md5=8db44633d6c2ee52b2065dea32e96679
Пріємов, С. І. (1971). Дослідження роботи мокрого пиловловлювача з дисковим розпилювачем в очищенні вентиляційних викидів. Дисертація. Київський національний університет будівництва і архітектури. (українською)
Jin Zijing, Hu Shengyong, Zhu Xiaotong, Feng Guorui, Sun Jian (2022). Research on wet-type swirl dust collection technology and its application in underground excavation tunnels. College of Safety and Emergency Management Engineering, Taiyuan University of Technology, 79 Yingzexi Street, Shanxi Province, Taiyuan, 030024, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140910943&doi=10.1016%2fj.apt.2022.103851&partnerID=40&md5=29d2819a67dcd44863de4d0a0ffb22d1
Concha-Lozano Nicolas, Muller Yan, Favreau Philippe, Suarez Guillaume (2025). Determination of ultrafine particle number emission factors from building materials in standardized conditions. Unit of Forensic Chemistry and Toxicology, CURML, Lausanne and Geneva University Hospital, Rue du Bugnon 19, Lausanne, 1011, Switzerland. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85218931381&doi=10.1093%2fannweh%2fwxae083&partnerID=40&md5=94158e67fb2dda5711351b1c2141b88d
Микитенко, М. Р., Любарець, О. П. (2024). Дослідження ступеня очищення аспіраційних викидів ливарних та будівельних цехів в пиловловлювачі з дисковим розпилювачем. У Зб. наукових праць з матеріалами II міжнародної конференції "Розвиток наук в умовах нової реальності: проблеми та перспективи", 3 травня 2024, Київ, 244–245. Київ: УКРЛОГОС Груп. DOI: 10.62731/mcnd-03.05.2024 (українською)
Коузов, П. А., Савіна, А. А. (1964). Вентиляторний пиловловлювач. ЛІОТ. (російською)
Зінич, П. Л., та ін. (2009). Дослідження мокрих скрубберів у промислових аспіраційних системах. Журнал промислової вентиляції, 18(2), 101–113. (українською)
Xie Zhuwei, Zhao Zhongtai, Li Dingfu, Li Fei, Zhang Chaojun, Huang Chen, Xiao Yimin (2023). Experimental study on the atomization characteristics and dust removal efficiency of a fan-shaped nozzle for purifying working environment. College of Civil Engineering, Chongqing University, Chongqing, 400045, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85163732366&doi=10.1016%2fj.scitotenv.2023.164994&partnerID=40&md5=19c2d63c35e073aee4edb3a3a6856f90
MacIntyre, N. R., Branson, R. D. (2008). Mechanical ventilation. Elsevier Canada, 352. http://doi.org/10.1016/j.vent.2008.02.009. (in English)
Gairola, R., Rao, D. V. (2013). Design of industrial ventilation systems for dust control. Journal of Occupational and Environmental Hygiene, 10(1), 43–50. http://doi.org/10.1080/15459624.2012.731131. (in English)
Ляшеник А. В., Тисовський Л. О., Дорундяк Л. М., Дадак Ю. Р. Обґрунтування конструкції циклона для очищення повітря на підприємствах деревообробної галузі. Лісівництво і агролісомеліорація : зб. наук. праць. – Харків: Вид-во УкрНДІЛГА. – 2011. – Вип. 21-09. – С. 119-125. (українською)
N. Maksuita, Yu. Golik (2019). Comparative analysis of pollution of atmospheric air in Cities (an Example of Leipzig and Poltava). Proceedings of CEE 2019. Advances in Resource-saving Technologies and Materials in Civil and Environmental Engineering/-2019.- P.260-267. DOI:10.1007/978-3-030-27011-7_33 (in English)
References:
Organiscak J. A., Noll J., Yantek D., Kendall B. (2016). Examination of a newly developed mobile dry Scrubber (DS) for coal Mine dust control applications. NIOSH, Pittsburgh, PA, United States. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84988316971&partnerID=40&md5=a4abfbcccb23e38f600e3047cbda2c3c
Bahloul Ali, Djebara Abdelhakim, Saidi Mohamed N. and Songmene Victor (2015). Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation. Chemical and Biological Hazards Prevention, Institut Robert-Sauvé en Santé et Sécurité du Travail, Montréal, Canada. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84987971010&partnerID=40&md5=cbade28442174a38505b8bca34d09dec
Jeon Tae-Yeong, Kim Jae-Yong (2015). Characterization of fine dust collection using a filter ventilation. Department of Environmental Engineering, Chungbuk National University, 362-763, Chungcheongbuk-do, South Korea. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84928411555&doi=10.14478%2face.2015.1022&partnerID=40&md5=de7670706aa4804b235c5e4134d93c76
Kateusz Przemysław (2015). Estimation of uncertainty of mean velocity of flue gas in a conduit as determined by the traverse method within the gravimetric measurement of particulate concentration. Silesian University of Technology, Department of Heating, Ventilation and Dust Removal Technology, ul. Konarskiego 20, Gliwice, 44-100, Poland. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84939185777&doi=10.1016%2fj.flowmeasinst.2015.07.014&partnerID=40&md5=c2a6079350c981ec02166b9d36d231b8
Jiang Zhong-An, Zhang Yi-Kun, Wang Ming (2016). Study and practice on dust control technology in fully mechanized excavation face. School of Civil and Environmental Engineering, University of Science and Technology—Beijing, Beijing, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85016767139&partnerID=40&md5=94d605a202bc1365106dc68ef2d760a7
Babaei Morteza, Bahrami Abdolrahman, Shahna Farshid Gorbani (2017). Control of fugitive dust emitted by combination of water spray and industrial ventilation as an efficient and economical solution at a mining company. Department of Occupational Health Engineering, Faculty of Public Health, Research Center for Health Science, Hamadan University of Medical Science, Hamadan, Iran. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85029471775&partnerID=40&md5=26a26b4248ff49d873557f226061865d
Zhao Haiming, Xie Xin, Xia Yimin, Liao Xiaole (2017). Research on operation parameters of three-phase flow in wet dust collecting fan. School of Mechanical and Electrical Engineering, Central South University, Changsha, 410083, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85026837770&doi=10.11817%2fj.issn.1672-7207.2017.06.013&partnerID=40&md5=6c72ea27bb02307ad39dc991f0415ddd
Arya Sampurna, Sottile Joseph, Novak Thomas (2018). Development of a flooded-bed scrubber for removing coal dust at a longwall mining section. Department of Mining Engineering, University of Kentucky, Lexington, KY, United States. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85052096035&doi=10.1016%2fj.ssci.2018.08.003&partnerID=40&md5=6424f4d4e952a9ab9992bab95eb568e5
Liu Yang, Xia Tianjie, Wang You, Chen Jinzhu, Li Xiaochuan (2020). Simulation and experimental investigation of dust-collecting performances of different dust exhaust hoods. School of Nuclear Science and Engineering, North China Electric Power University, Beijing, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85094645662&doi=10.1080%2f10962247.2020.1813841&partnerID=40&md5=f9785e5b7aaa81a61eab4be4dcff19ed
Yin Wenjing, Zhou Gang, Liu Dong, Meng Qunzhi, Zhang Qian, Jiang Tao (2021). Numerical simulation and application of entrainment dust collector for fully mechanized mining support based on orthogonal test method. College of Aeronautical Engineering, Weifang Engineering Vocational College, Weifang, 262501, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85098108778&doi=10.1016%2fj.powtec.2020.10.059&partnerID=40&md5=5e8fae1d9ee947a62f8fb27e402d405a
Fang Xueming, Jiang Bingyou, Yuan Liang, Liang Yuxiang, Ren Bo, Tao Wenhan, Li Xianbao (2022). Experimental Study on Atomization Characteristics of Gas–Liquid Two-Phase Flow Nozzle and Its Dust Removal Effect. Key Laboratory of Industrial Dust Control and Occupational Health, Ministry of Education, Anhui University of Science and Technology, Huainan, 232001, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85122887236&doi=10.3390%2fma15020565&partnerID=40&md5=ee80ac22aab9575bc098764a573b93d4
Zhao Xinli, Jia Jifeng, Li Xiaochuan, Wang Li, Wang Yuyao, Hu Haibin, Shen Zhiyuan, Jiang Yefeng (2022). Potential Use of Wet Scrubbers for the Removal of Tobacco Dust Particles in the Tobacco Industry. School of Chemical Engineering and Technology, China University of Mining and Technology, Xuzhou, 221116, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85125658358&doi=10.3390%2fatmos13030380&partnerID=40&md5=3140e02a823d6ad75e06200731c23b36
Angelina Chugai, Yuliia Bazyka (2019). Analysis of technogenic load on the air basin of industrial and urban aglomerations in Ukraine. Environmental Problems Vol. 4, No. 3, 2019, pp.167-173 DOI: https://doi.org/10.23939/ep2019.04.167 (in English)
Шелюх Ю. Є. (2016). Дослідження впливу гідравлічного опору на продуктивність роботи вихрових пиловловлювачів нового покоління. Вісник Львівського державного університету безпеки життєдіяльності, 13, 137-143. (українською)
Тисовський Л. О., Дорундяк Л. М., Ляшеник А. В., Дадак Ю. Р. (2010). Побудова математичної моделі для задачі про рух повітря в циклоні. Всеукраїнський науково-технічний журнал ПГіП. – 2010. – Вип. 2(28). – С. 57-62.
Ткачук, А. Я., Любарець, П. А., Петриченко, М. І., Степчук, І. Д. (1983). Пиловловлювач. Патент № 1044317 СРСР. Б.І. 1983, № 36, с. 19. (російською)
Зіняк, В. В., Ткачук, А. Я. (2001). Технологія очищення пилу в мокрих скрубберах. Технологічний розвиток вентиляційних систем, 13, 145–151. (українською)
Чакчір, Я. А., Петров, М. І., Петриченко, М. І., Сенько, П. М., Любарець, О. П. (1988). Пиловловлювач для мокрого очищення вентиляційних викидів. Патент № 1389825 СРСР. Б.І. 1988, № 15, с. 41. (російською)
Гаджієв, Е. Н., Варламов, Є. М. (2017). Аналіз дисперсії пилу в аспіраційних системах при виробництві теплоізоляційних матеріалів. Український науково-дослідний інститут екологічних проблем, Харків, 192. (українською)
Yu Yanbin, Fang Lianxin, Zhou Bo, Cui Wenting, Yin Shi, Song Kezhi (2025). Ventilation parameters’ impact on artificial tornado-based cylindrical vortex dust removal system performance. State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao, 266590, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-86000782144&doi=10.1016%2fj.apt.2025.104852&partnerID=40&md5=1a82ea8fb0e8328c480682d15688ecda
Ратушняк, Г. С., Лялюк, О. Г. (2009). Пристрої для очищення газових викидів. IV НВКП "Укргеліотех", 180. (українською)
Спінов В. М., Афтанюк В. В. (2011). Експериментальне дослідження кінетики мокрого пиловловлювача. Енергозбереження. Енергетика. Енергоаудит, Національний технічний університет «Харківський політехнічний інститут» № 2 (84), с. 32-46. (українською)
Любарець, О. П., Микитенко, М. Р. (2023). Аналіз факторів, що впливають на стан знепилення аспіраційних викидів. Вентиляція, Київський національний університет будівництва і архітектури, випуск 46, 89. (українською). Джерело: http://vothp.knuba.edu.ua/article/download/298374/291122 (українською)
Афтанюк В. В., Кіріс О. В., Даниленко Д. В., Афтанюк А. В. (2022). Розробка інтегрованої конструкції скрубера для суднових енергетичних установок. Суднові енергетичні установки: науково-технічний збірник. Вип. 45-Одеса: НУ «ОМА», 2022.-201 с. (українською)
Ilyushin Y., Talanov N. (2025). Development of Methods and Models for Assessing Technical Condition of Mines and Underground Structures. Economics Faculty, Empress Catherine II Saint Petersburg Mining University, Saint-Petersburg, 199106, Russian Federation. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85216569413&doi=10.5829%2fije.2025.38.07a.16&partnerID=40&md5=8db44633d6c2ee52b2065dea32e96679
Пріємов, С. І. (1971). Дослідження роботи мокрого пиловловлювача з дисковим розпилювачем в очищенні вентиляційних викидів. Дисертація. Київський національний університет будівництва і архітектури. (українською)
Jin Zijing, Hu Shengyong, Zhu Xiaotong, Feng Guorui, Sun Jian (2022). Research on wet-type swirl dust collection technology and its application in underground excavation tunnels. College of Safety and Emergency Management Engineering, Taiyuan University of Technology, 79 Yingzexi Street, Shanxi Province, Taiyuan, 030024, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140910943&doi=10.1016%2fj.apt.2022.103851&partnerID=40&md5=29d2819a67dcd44863de4d0a0ffb22d1
Concha-Lozano Nicolas, Muller Yan, Favreau Philippe, Suarez Guillaume (2025). Determination of ultrafine particle number emission factors from building materials in standardized conditions. Unit of Forensic Chemistry and Toxicology, CURML, Lausanne and Geneva University Hospital, Rue du Bugnon 19, Lausanne, 1011, Switzerland. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85218931381&doi=10.1093%2fannweh%2fwxae083&partnerID=40&md5=94158e67fb2dda5711351b1c2141b88d
Микитенко, М. Р., Любарець, О. П. (2024). Дослідження ступеня очищення аспіраційних викидів ливарних та будівельних цехів в пиловловлювачі з дисковим розпилювачем. У Зб. наукових праць з матеріалами II міжнародної конференції "Розвиток наук в умовах нової реальності: проблеми та перспективи", 3 травня 2024, Київ, 244–245. Київ: УКРЛОГОС Груп. DOI: 10.62731/mcnd-03.05.2024 (українською)
Коузов, П. А., Савіна, А. А. (1964). Вентиляторний пиловловлювач. ЛІОТ. (російською)
Зінич, П. Л., та ін. (2009). Дослідження мокрих скрубберів у промислових аспіраційних системах. Журнал промислової вентиляції, 18(2), 101–113. (українською)
Xie Zhuwei, Zhao Zhongtai, Li Dingfu, Li Fei, Zhang Chaojun, Huang Chen, Xiao Yimin (2023). Experimental study on the atomization characteristics and dust removal efficiency of a fan-shaped nozzle for purifying working environment. College of Civil Engineering, Chongqing University, Chongqing, 400045, China. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85163732366&doi=10.1016%2fj.scitotenv.2023.164994&partnerID=40&md5=19c2d63c35e073aee4edb3a3a6856f90
MacIntyre, N. R., Branson, R. D. (2008). Mechanical ventilation. Elsevier Canada, 352. http://doi.org/10.1016/j.vent.2008.02.009. (in English)
Gairola, R., Rao, D. V. (2013). Design of industrial ventilation systems for dust control. Journal of Occupational and Environmental Hygiene, 10(1), 43–50. http://doi.org/10.1080/15459624.2012.731131. (in English)
Ляшеник А. В., Тисовський Л. О., Дорундяк Л. М., Дадак Ю. Р. Обґрунтування конструкції циклона для очищення повітря на підприємствах деревообробної галузі. Лісівництво і агролісомеліорація: зб. наук. праць. – Харків: Вид-во УкрНДІЛГА. – 2011. – Вип. 21-09. – С. 119-125. (українською)
N. Maksuita, Yu. Golik (2019). Comparative analysis of pollution of atmospheric air in Cities (an Example of Leipzig and Poltava). Proceedings of CEE 2019. Advances in Resource-saving Technologies and Materials in Civil and Environmental Engineering/-2019.- P.260-267. DOI:10.1007/978-3-030-27011-7_33 (in English)
DOI: https://doi.org/10.26886/2414-634X.3(67)2025.1
Refbacks
- There are currently no refbacks.