THEORETICAL STUDY OF ENERGY CHARACTERISTICS WITH JUSTIFICATION TECHNICAL DATA MIXERS OF CONTINUOUS ACTION

Alatoom Mohammad Fayiz Ahmad

Abstract


Improving the efficiency of the process of mixing of feed for the sheep and goats can be achieved by applying the mixing of the working body able to qualitatively move groups of different sizes of particles from one position to another. In addition, effective mixer should provide a continuous process with minimal cost of energy and labour. Calculation of power parameters fodder mixing process is crucial when choosing the design parameters and it has a decisive significance is also important to take into account the fact that the quality ration can be obtained only from the ground components, the dimensions of which correspond to the veterinary technical requirements.

The results of theoretical studies provide a basis for the study of the basic design parameters of the working bodies of feed mixer. It was found that the feed particles oscillate in the variable radius with a simultaneous axial movement, which is achieved by a non-cylindrical shape of the hopper. The simplest non-cylindrical design of the hopper, from the standpoint of manufacturing in the production, is a truncated cone. Determine the total power expended on the work and power, the need to idle the rotor, thus reducing the value of the considered transport capacity.

Keywords: adhesion, cohesion, bunker, energy intensity, cone shape, feed mixture, the coefficient of friction, livestock requirements

 


Full Text:

PDF

References


V. Kholodyuk (2010). Teoretichnі ta eksperimentalnі doslіdzhennya podrіbnyuvacha kormіv z diskovimi nozhami. Vіnnitskiy natsіonalniy agrarniy unіversitet, 45-56.

89 Baharev D.N. (2007). Improving the efficiency of the process of threshing and development design grind corn cobs: Dis .... the candidate tehn. Sciences: 05.05.11 / Baharev Dmitri. - Lugansk,. - 188.

94 Haylіs G.A. (1992). Basics of teorії that rozrahunku sіlskogospodarskih machines / Haylіs GA - K .: Vidavnitstvo OSGA. - 240.

Kudіnov Є.І.. Boyko І.G. (2013). Analіz sposobіv podrіbnennya zernovikh kormіv stosovno їkh energoєmnostі/ KhNTUSG. Vіsnik 273, 198-204.

101 Bender І.M. (2011). Proektuvannya mehanіzovanih tehnologіchnih protsesіv in tvarinnitstvі -Kamianets-Podіlsky: FOP Cicin OV.- 564.

90. Shmat K.І. (2003). Teorіya i rozrahunki zernozbiralnih kombaynіv. - Kherson: OLDІ - plus. - 256.

John Bird. (2008). Engineering Mathematics. - M.: "Dodeka XXI» Publishing House. – 544.

Kartashov L.P. Bashkov A.F. Manannikov P.P. (1987). Sovershenstvovaniye rabochego protsessa izmelchiteley. Mekhanizatsiya i elektrifikatsiya selskogo khozyaystva, № 9. 44-45.

Volvak S.F. (1998). Obґruntuvannya tekhnologіchnogo protsesu і parametrіv robochikh organіv gnuchkogo unіversalnogo malogabaritnogo kormoprigotuvalnogo agregatu u varіantі podrіbnennya grubikh kormіv: dis…. kand. tekhn. nauk: Volvak Sergіy Fedorovich 05.20.01. - Lugansk: LSGІ. 244.

Тhe continuous-running fodder mixer. (2013). Mohammad Alatoom. Materialy IX Mezinarodni vedecko-prakticka konference «Veda a technologie: krok do budoucnosti-» - Praha: PH «Education and Science». – Dil 24. 16-19.

105 Goryachkin V.P. Collected Works in seven volumes. 5. Volume / ed. Doctors agricultural IF Sciences Vasilenko, VA Zheligovskaya, ND Lucinschi, SV Field

Braginets N.V. (2014) Theoretical studies of the energy performance of feed mixer work Continuous / Braginets N.V., Baharev D.N., Mohammad Al-Atum. // News Harkіvskogo natsіonalnogo tehnіchnogo unіversitetu sіlskogo Gospodarstwa іmenі Peter Vasilenko / Tehnіchnі Sistemi i tehnologії tvarinnitstva. 144. Key infrastructure - Kharkiv: HNTUSG. 189-195..

Pivovar V. S. (2008). Novі tekhnologії prigotuvannya ta rozdavannya kormosumіshey na fermakh velikoї rogatoї Myasnoye delo: ezhemesyachnyy proizvodstvenno-prakticheskiy zhurnal, №1, 66-69.

107. The wetting // (electronic resource) - Mode of access: http: //ru.wikipedia.org/wiki/.

Germezov D.M. (2006). Primeneniye kormorazdatchikov-smesiteley - zalog povysheniya produktivnosti rogatogo skota. Tekhnika APK, №4, 46-47.

82 Spravochnik in Physics (1998).Gelfgat I.M.- Moscow - Kharkiv: Ileksa. - 348.

Karabinesh S.S. (2016). Golografiya. Kontrol kachestva detaley. Germaniya. Berlin, Saabryuken, LAP, 213 .

Bratіshko V.V. (2005). Poshuk ratsіonalnoї konstruktsії podrіbnyuvacha zelenikh kormіv. Naukoviy vіsnik Lvіvskoї natsіonalnoї akademії veterinarnoї meditsini іm. S.Z. Ґzhitskogo. – Tom 7. № 4 (27). Chastina 1, Lvіv: LKT LNAVM, 3-9.

Иродов И.Е. (1978). Основные законы механики.– М.: Высш. школа,. – 240.

Braginets. N.V. (2015). Eksperimentalnyye issledovaniya protsessa izmelcheniya grubykh i stebelchatykh kormov izmelchitelem s kombinirovannymi nozhami. Konstruyuvannya. virobnitstvo ta ekspluatatsіya sіlskogospodarskikh mashin: zagalnoderzh. mіzhvіd. nauk.-tekhn. zb. - Kіrovograd: KNTU. - Vip. 45. ch. 2. 129-134.

Bargo F., Muller L.D., Delahoy J.E., Cassidy T.W. (2002). Performance of high producing dairy cows with three different feeding systems. J. Dairy Science - Vol. 85.- № 11, 2948 - 2963.


Refbacks

  • There are currently no refbacks.