SELECTION AND JUSTIFICATION OF COMFORTABLE MICROCLIMATE PARAMETERS FOR OFFICE PREMISES

G. Khimicheva, O. Dziuba

Abstract


The paper analyzes the requirements of international standards for the parameters that determine the comfortable working conditions in office premises, in particular when working with the computer. It has been proposed to determine the microclimate of office premises by four parameters and it is shown that one of the promising methods is a method based on the calculation of two indicators that specify the degree of comfort, taking into account the requirements of potential consumers. The application of the proposed methods and approaches allows to reasonably choose the microclimate parameters (temperature, humidity, air quality, and electrical radiation) that affect the life and health of the worker.

Keywords: microclimate parameters, international standards, comfortable working conditions, office premises.


Full Text:

PDF

References


Бабаскін, А.Ю., Баранюк, Ю.В., Дріжчана С.В. та ін. (2004). Трудове право України: Академічний курс: Підручник. Ред. Н. М. Хуторян. К. Видавництво А. С. К. 607.

Ismai, l A. R., Jusoh, N., Mat, S. (2010). Thermal comfort of green energy office (GEO) building. National Conference in Mechanical Engineering Research and Postgraduate Students 26.03–27.03, (Malaysia) 427–435.

ГОСТ 12.1.005-88 (1988). Загальні санітарно-гігієнічні вимоги до повітря робочої зони.

ДСН 3.3.6.042 - 99 (12.01.1999). Санітарні норми мікроклімату виробничих К., Мінрегіонбуд України, 9.

ISO 8996:2004 (2004). Ergonomics of the thermal environment — Determination of metabolic rate.

Захарченко, М.П., Бовтюшко, В.Г., Хавинсон, В.Х., Губернский, Ю.Д. (2002). Ионизация воздушной среды и здоровье. СПб. Нордмедиздат. 200.

Fatokun, F., Jayaratne, R., Morawska, L. (2007). Airborne particle and ion concentration levels in the environment of strong corona ion emitter Source. European Aerosol Conference (EAC 2007) 9.09–14.09, (256 Salzbyrg), 171–178.

Назаренко, В. І. (2009). Біологічні особливості комбінованої дії фізичних факторів виробничого середовища. Український журнал з проблем медицини праці. № 43, 12–17.

Smith, A., Mc Namara, R., Welleus, B.-Cardif. (2004). Combined Effects of Occupationall Health Hazards University: Research Report. No. 287, 182.

Mayer E. (1993) Objective criteria for thermal comfort. Building and Environment. Vol. 28. iss. 4, 399–403.

Zhang H., Huizenga, C., Arens, E., Yu, T. (2005). Modeling thermal comfort in stratified environments. Proceedings from 10th International Conference on [Indoor Air Quality and Climate]. 4.09–9.09. Beijing, 133–137.

Hensen, J. L. M. (1990). Literature review on thermal comfort in transient conditions. Building and Environment. No. 25 (4), 309–316.

Licina, D., Pantelic, J., Melikov, A. (2014). Experimental investigation of the human convective boundary layer in a quiescent indoor environment [et al.]. Building and Environment. No. 75, 79–91.

Dyment, P. (2014). Clean indoor air for health and sustainability. REHVA Journal. No. 5, 59–60.

DIN EN 12599-2013 (2013). Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems. 01.01.2013, 87.

ISO 7730:2005 (2005). Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. 11.2005, 52.

ISO 13790:2008 (2008). Energy performance of buildings — Calculation of energy use for space heating and cooling. 03.2008, 162.

Фангер П. O. (2003). Качество внутреннего воздуха в ХХІ веке: влияние на комфорт, производительность и здоровье людей. АВОК. № 4, 12–22.

ISO 7726:1998 (1998). Ergonomics of the thermal environment — Instruments for measuring physical quantities. 11.1998, 51.

EN 15251:2007 (2007). Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. 16.05.2007.

EN 12831-1:2017 (2017). Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3. 12.07.2017.

DIN EN 15243-2007 (2007). Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems. 01.10.2007, 162.

DIN EN 13182-2002 (2002). Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces (including corrigendum AC:2002). 1.12.2002, 19.

VDI 3804 :2009-03 (2009). Raumlufttechnik Bürogebäude (VDI-Lüftungsregeln) Air-conditioningOffice buildings(VDI ventilation code of practice) 03.2009, 40.

DIN EN 1264-2:2013-03 (2013). Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods. 03.2013, 45.

References:

Babaskin, A., Baraniuk, V., Drizhchana V. ta in. (2004). Trudove pravo Ukrainy: Akademichnyi kurs: Pidruchnyk. Red. N. Khutorian. K. Vydavnytstvo A.S.K. 607.

Ismail, A., Jusoh, N., Mat, S. (2010). Thermal comfort of green energy office (GEO) building. National Conference in Mechanical Engineering Research and Postgraduate Students 26.03–27.03, (Malaysia) 427–435.

HOST 12.1.005-88 (1988). Zahalni sanitarno-hihiienichni vymohy do povitria robochoi zony.

DSN 3.3.6.042 - 99 (12.01.1999). Sanitarni normy mikroklimatu vyrobnychykh K., Minrehionbud Ukrainy, 9.

ISO 8996:2004 (2004). Ergonomics of the thermal environment — Determination of metabolic rate.

Zakharchenko, M., Bovtiushko, V., Khavynson, V., Hubernskyi, Yu. (2002). Yonyzatsyia vozdushnoi sredы y zdorove. SPb. Nordmedyzdat. 200.

Fatokun, F., Jayaratne, R., Morawska, L. (2007). Airborne particle and ion concentration levels in the environment of strong corona ion emitter Source. European Aerosol Conference (EAC 2007) 9.09–14.09, (256 Salzbyrg), 171–178.

Nazarenko, V. (2009). Biolohichni osoblyvosti kombinovanoi dii fizychnykh faktoriv vyrobnychoho seredovyshcha. Ukrainskyi zhurnal z problem medytsyny pratsi. № 43, 12–17.

Smith, A., Mc Namara, R., Welleus, B.-Cardif. (2004). Combined Effects of Occupationall Health Hazards University: Research Report. No. 287, 182.

Mayer E. (1993) Objective criteria for thermal comfort. Building and Environment. Vol. 28. iss. 4, 399–403.

Zhang H., Huizenga, C., Arens, E., Yu, T. (2005). Modeling thermal comfort in stratified environments. Proceedings from 10th International Conference on [Indoor Air Quality and Climate]. 4.09–9.09. Beijing, 133–137.

Hensen, J. L. M. (1990). Literature review on thermal comfort in transient conditions. Building and Environment. No. 25 (4), 309–316.

Licina, D., Pantelic, J., Melikov, A. (2014). Experimental investigation of the human convective boundary layer in a quiescent indoor environment [et al.]. Building and Environment. No. 75, 79–91.

Dyment, P. (2014). Clean indoor air for health and sustainability. REHVA Journal. No. 5, 59–60.

DIN EN 12599-2013 (2013). Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems. 01.01.2013, 87.

ISO 7730:2005 (2005). Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. 11.2005, 52.

ISO 13790:2008 (2008). Energy performance of buildings — Calculation of energy use for space heating and cooling. 03.2008, 162.

Fanher P. (2003). Kachestvo vnutrenneho vozdukha v KhKhI veke: vlyianye na komfort, proyzvodytelnost y zdorove liudei. AVOK. № 4, 12–22.

ISO 7726:1998 (1998). Ergonomics of the thermal environment — Instruments for measuring physical quantities. 11.1998, 51.

EN 15251:2007 (2007). Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. 16.05.2007.

EN 12831-1:2017 (2017). Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3. 12.07.2017.

DIN EN 15243-2007 (2007). Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems. 01.10.2007, 162.

DIN EN 13182-2002 (2002). Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces (including corrigendum AC:2002). 1.12.2002, 19.

VDI 3804:2009-03 (2009). Raumlufttechnik Bürogebäude (VDI-Lüftungsregeln) Air-conditioningOffice buildings(VDI ventilation code of practice) 03.2009, 40.

DIN EN 1264-2:2013-03 (2013). Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods. 03.2013, 45.




DOI: https://doi.org/10.26886/2414-634X.4(48)2021.4

Refbacks

  • There are currently no refbacks.